Phone#: +27 (0)11 310 8660 / 2324 / 7113
Fax#: +27 (0)86 545 6012
Reckli Formliners
Safety Netting / Barrier Netting
Try our scaffolding accessories!
BASE JACKS
COMBI-NUTS
SCAFFOLDING COUPLERS
Ferrule Tubing for Fromwork Tie Rods
Product |
Inside |
Outside |
Meter |
Code |
Diameter (mm) |
Diameter (mm) |
Lenghts |
C-1-20 |
17 |
20 |
3 |
C-1-25 |
22 |
25 |
3 |
C-1-30 |
26 |
30 |
3 |
Ferrule tubing is used to space shutters and
to recover expensive concrete shutter tie-rods (Ferrules / Tie Rods).
The inside diameter of the Ferrule tubing needs
to be at leat 1mm greater than that of the tie-rod (Ferrule)
being used to fix the shutter. Ferrule tube end cones are
inserted at each end to seal off the hole in the shutter.
Ferrule Tube Push-on Cones (End Cones)
Product |
Tubing Inside |
Tubing Outside |
Packaging |
Code |
Diameter (mm) |
Diameter (mm) |
Quantity |
EC-17-20 |
17 |
20 |
2000 |
EC-22-25 |
22 |
25 |
2000 |
EC-26-30 |
26 |
30 |
1000 |
Ferrule Tubing Push-on Cones (End cones) are used as ends
on Ferrule Tubing (Tie-rod sleeves) to space shutters for the thickness
of the concrete casting. Fits on the inside of the Ferrule Tubing
(Tie-rod sleeve). Can be removed after the shutters have been dismantled
and be used again. These Ferrule Tubing cones allow 10mm spacing on each
end of the Ferrule Tubing.
30mm Ferrule Tubing Push-on Cones
Product |
Tubing Inside |
Tubing Outside |
Packaging |
Code |
Diameter (mm) |
Diameter (mm) |
Quantity |
EC30-22-25 |
22 |
25 |
1000 |
The 30mm Ferrule Tubing End Cones were made for the 22mm (ID) x 25mm (OD) Ferrule Tubing.
These Ferrule Tubing cones allow 30mm spacing on each end of the Ferrule Tubing.
Ferrule Tubing Permanent Push-on Cones
Product |
Tubing Inside |
Tubing Outside |
Packaging |
Code |
Diameter (mm) |
Diameter (mm) |
Quantity |
PC-1-25 |
22 |
25 |
500 Pairs |
Ferrule tubing permanent cones could be used as a substitute for ferrule tubing
end cones (push-on cones). They remain in the concrete after the shutter has
been removed and are plugged with a matching cap to ensure a clean and neat
finish of the concrete casting. They save time and money because labourers
won't have to patch up unsightly holes left as a result of tie rod holes.
Sold in pairs - cone and plug.